More Instructions
Schedule o time
When the schedule o time feature is enabled, the speaker will automatically power o if it
has been idle (no ongoing operation or playback) for a specic period of time.
To enable the feature, open the AI Life app, touch the speaker card on the Home screen,
select Schedule o time, and specify a time period. To disable the feature, select Never.
The schedule o time feature is enabled by default, with the time period set to 15
minutes.
Low power consumption mode
When the speaker is powered on, it enters the idle state. Enabling the low power
consumption mode can save power and extend the usage time.
To enter the low power consumption mode, press and hold the voice button for 5
seconds.
You can exit the low power consumption mode in either of the following ways: press any
button, use NFC tapping, shake the speaker, or play audio over Bluetooth.
Restore the speaker to its factory settings
To restore the speaker to its factory settings, perform the following:
Make sure that the speaker is connected to a power source, and press and hold the Play/
Pause button and the Volume button at the same time for about 5 seconds.
Update
The speaker can be updated for a better user experience. Please update your speaker to the
latest version in a timely manner.
The update usually takes about 5 to 10 minutes. During the update, ensure that your phone
is connected to the speaker over Bluetooth and the network connection is stable. Do not exit
the update screen. You will not be able to use your speaker during the update.
Charging
1 It is recommended that you use a 5 V/2 A, 9 V/2 A, or 10 V/4 A charger to charge the
speaker. After the speaker is fully charged, remove the charger to extend the battery life.
10
To Next Page
Loading...
Need help?
General
Weight and Dimensions
