Figure 7-9 Feature parameters
Table 7-3 Feature parameters
Parameter
Description
MPPT multi-peak scanning When the inverter is used in scenarios where PV strings are
greatly shaded, set this parameter to Enable, and then the
inverter will perform MPPT scanning at regular intervals to
locate the maximum power.
MPPT multi-peak scan interval
(min)
Species the MPPT scanning interval.
This parameter is displayed when MPPT multi-peak scanning
is set to Enable.
SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 11 (2021-11-10) Copyright © Huawei Technologies Co., Ltd. 81
To Next Page
Loading...
Need help?
General