Need help?Do you have a question about the Huawei SUN2000-125KTL-M0 and is the answer not in the manual?
General| Model | SUN2000-125KTL-M0 |
|---|---|
| Type | String Inverter |
| Max. DC Voltage | 1100 V |
| Start Voltage | 200 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Max. Input Current per MPPT | 26 A |
| Rated Output Power | 125000 W |
| Rated AC Power | 125 kW |
| Rated AC Voltage | 400 V |
| Nominal Output Voltage | 400 V |
| Rated AC Grid Frequency | 50 Hz / 60 Hz |
| Output Frequency | 50 Hz / 60 Hz |
| Max. Output Current | 180 A |
| Total Harmonic Distortion (THD) | < 3% |
| Max. Efficiency | 98.8% |
| European Weighted Efficiency | 98.4% |
| Operating Temperature Range | -25 °C to +60 °C |
| Protection Degree | IP65 |
| Max. DC Power | 125 kW |
| Max. Input Power | 137500 W |
| Input Voltage Range | 200 V - 1000 V |
| Max. Output Power | 137500 W |
| Max. AC Power | 125 kW |
| Adjustable Power Factor Range | 0.8 leading to 0.8 lagging |
Provides essential safety statements, precautions, and Huawei's liability for equipment use.
Outlines the necessary training and qualifications for personnel handling the equipment.
Covers grounding requirements and general electrical safety during installation and operation.
Details safety instructions for connecting AC/DC power cables and proper cabling practices.
Details safety procedures and warnings for maintenance and component replacement.
Step-by-step guide for physically installing the SUN2000 inverter onto the mounting bracket.
Safety advice and warnings before making electrical connections to the inverter.
Detailed steps for connecting the AC output power cable to the inverter.
Comprehensive guide on connecting DC input power cables and terminal descriptions.
A checklist of essential checks to perform before powering on the inverter.
Step-by-step instructions for safely powering on the SUN2000 inverter.
Steps for safely shutting down and powering off the SUN2000 inverter.
Specific procedure for powering off the inverter for fault diagnosis or replacement.
Identifies common alarms, their possible causes, and suggested troubleshooting measures.
Details the maximum, Chinese, and European efficiency ratings for different models.
Lists input parameters such as voltage, current, and number of MPPT trackers.
Provides output parameters like rated power, voltage, current, and frequency.
Summarizes the protection features supported by different SUN2000 models.
To Next Page