Huawei SUN2000-12KTL - Appearance and Dimensions

12
3. Connect to the solar inverter WLAN and log in as installer to access the device commissioning
screen.
At the first login, the Quick
settings screen is displayed
by default. Exit the quick
settings.
Before replacing SUN2000-(8KTL–12KTL) with SUN2000-(8KTL–12KTL)-M2, you must replace
the protocol. Otherwise, SUN2000-(8KTL–12KTL)-M2 cannot connect to the management
system.
4. Choose Maintenance > Device replacement, select the type of the original device, and
complete the replacement.
Select a model for device
replacement, set the grid
code, time zone, and
time, and complete the
protocol replacement.
In this scenario, you do not need to
manually set the communication address.
The SmartLogger automatically allocates
the address.
Restore the device to its
factory settings before
replacement.