Huawei SUN2000-17KTL - Page 35

34
5. (Optional) Install the AC adapter box on
the mounting bracket.
3. Install the SUN2000 onto the mounting
bracket.
4. Tighten the security Torx screws on both
sides of the SUN2000.
6. Tighten the two screws on the left of the
AC adapter box.

If the original AC output power cable and signal cables are long enough to connect to the AC
port on the SUN2000, you do not need to install an AC adapter box.

Secure the SUN2000 before installing the AC adapter box.

When installing the AC adapter box, align the mounting holes on the left to locate the
mounting position.
2. (Optional) Install the locking screw for the DC switch.