Connectivity
30
Connecting via Bluetooth
Bluetooth-based Synchronization
Your phone can respond to data synchronization requests from a PC. To operate the
Bluetooth synchronization with your phone, your PC must support Bluetooth function.
1. Install the PC Suite.
2. Select Bluetooth > On to enable the Bluetooth function, and then select Discov-
erable > Yes.
3. Run the driver software for Bluetooth on the PC, and pair the phone. After the PC
detects the phone serial port service, activate the Bluetooth serial port service on
the phone.
4. Run the PC Suite on the PC.
5. You can now operate the synchronization. For details of the operation, refer to the
help section in the PC Suite software.
NOTE: Only Windows 2000, Windows XP and Windows Vista are supported.
Bluetooth-based Data Transfer
You can exchange data between your Bluetooth phone and other Bluetooth devices. If
you want to exchange data between your phone and another device, that device must
support Bluetooth and the Bluetooth function must be enabled.
1. Select Bluetooth > On to enable the Bluetooth function.
2. Select Search to search a Bluetooth device. When a Bluetooth device is found for
the first time, authentication is required.
3. Now you can exchange data between your phone and the other Bluetooth device.
To Next Page
Loading...
