11
3. After you perform the settings, the Bypass mode and No battery alarms are reported by the
MDU and do not need to be cleared. If there is any other alarm, you need to rectify the fault.
4. View the system running status diagram on the MDU to check that the UPS is working in bypass
mode.
System User
LCD Preset
Password
WebUI Preset
Password
admin (system administrator) 000001 Changeme
operator (common user) 000001 Changeme
1. On the main menu, choose Common Functions and tap Inv. ON.
2. In the displayed login window, enter the user name and password, and tap .
3. In the displayed dialog box, tap Yes to start the inverter.
Starting inverter
5.3
To ensure system security,
change the LCD and
WebUI passwords after
the first login.
2. Set the language, time, date, network parameters, and system parameters on the Settings
Wizard screen.
To Next Page
Loading...
Need help?
General
