Changing the Wi-Fi Password
2.Choose Advanced Configuration > WLAN > 2.4G Basic Network
Settings (or 5G Basic Network Settings), and change the password.
1.Check that the default network address, user name, and password
are on the nameplate on the rear side of the WA8011V.
Note:
1. If the Wi-Fi password has been synchronized as the
wireless password of the router, to change the password, see
the method described for the router.
2. If you cannot access the web page of the WA8011V using
the IP address on the nameplate, power off the upper-layer
gateway connected to the WA8011V, restart the WA8011V,
and try again.
11:47
192.168.101.1
Basic Network Settings
Enable WLAN
SSID Configuration Details
SSID Name:
WPA PreSharedKey:
XXXXXXX
········
SkipApply
01 02 03 04
05 06 07 08 09
10 11
12 13 14
15 16
To Next Page
Loading...
