Huawei WIFI AX2 - Configure HUAWEI Router as Wireless Switch; Connect Cables and Power On; Connect to Routers Wi-Fi or LAN; Set Bridge (AP) Mode

Manage the router with our mobile app
Scan the QR code to download and install the HUAWEI AI Life App
on your mobile phone or tablet. You can use the app to manage
your router.
Indicator
Steady green
Connected to the network
Not connected to the network
• Loose cable or connect error. Check the cable.
• Broadband network error. Contact your broadband carrier.
Steady red
Flashing
The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect) , the indicator
on the HUAWEI WiFi AX2 will flash. When this happens, press the HUAWEI
WiFi AX2's WPS/RESET button. The indicator should flash quickly, indicating
that the pairable device is connecting to the HUAWEI WiFi AX2. The
connection process is complete when the indicator stops flashing.
If you touched the WPS/RESET button by accident, wait for 8 seconds till the
indicator returns to normal.
6