Need help?Do you have a question about the Huawei WiFi Q2 and is the answer not in the manual?
General| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
|---|---|
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| WLAN data transfer rate (max) | 1167 Mbit/s |
| WLAN data transfer rate (first band) | 300 Mbit/s |
| WLAN data transfer rate (second band) | 867 Mbit/s |
| Product type | Tabletop router |
| Product color | White |
| Ethernet LAN | Yes |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Memory card slot(s) | No |
| Ethernet LAN (RJ-45) ports | 3 |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 24 W |
| Processor model | Realtek RTL8197F + Realtek RTL8812BR + Hisilicon Hi5630 + HiSilicon Hi1151 |
| Security algorithms | AES, TKIP, WPA-PSK, WPA2-PSK |
| DSL WAN | - |
| WAN connection type | RJ-45 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Cables included | AC, LAN (RJ-45) |
Weight and Dimensions| Depth | 75 mm |
|---|---|
| Width | 112 mm |
| Height | 183.5 mm |
| Weight | 495 g |
Connect your phone to the router's Wi-Fi and open the HUAWEI SmartHome app for setup.
Follow app prompts to configure the router after detection, touching CONFIGURE.
Enter broadband account and password, or retrieve from an old router if forgotten.
Set a new Wi-Fi name, Wi-Fi password, and optionally use Wi-Fi password as management password.
Indicates the router is connected to the Internet.
Indicates the router is not connected to the Internet.
Signals that the router has detected a pairable device or is connecting.
Troubleshooting steps if the HUAWEI WiFi Q2 is not recognized by the HUAWEI SmartHome app.
Solutions for common problems encountered during router configuration.
Guidance on retrieving settings from an old router or contacting the carrier.
Instructions on how to reset the HUAWEI WiFi Q2 to its factory default settings.
Steps for connecting an additional HUAWEI router using wired or H button pairing.
How to connect to the 5 GHz Wi-Fi network and manage the feature.
Steps to configure a Wi-Fi timer schedule for the router.
General safety advice and precautions for using the electronic device.
Warnings and recommendations regarding potential interference with medical devices.
To Next Page