EasyManuals Logo

Huawei WiFi Q2 User Manual

Huawei WiFi Q2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
The other two routers are plug and play. Place the two routers in a room with poor Wi-Fi signal
reception and connect them to a wall socket. Wait for approximately two minutes until the indicator
turns steady blue, indicating that the router is connected to the network. You can also check their
network connection through the HUAWEI SmartHome app.
6
The three routers share the same Wi-Fi name and password. When you move
across rooms, you will automatically connect to the faster Wi-Fi network.
If the indicator on the router is steady red or the HUAWEI SmartHome app
shows the router is not connected to the network, this indicates that the router
has no Internet access.
Make sure that:
1) Ensure that all three routers are connected to wall sockets (some power strips
have EMI filters that may cause a router to be unable to connect to the network).
2) The distance between any two routers is less than 10 meters and there are
no more than two walls in between.
40 Mbps
HUAWEI WiFi Q2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei WiFi Q2 and is the answer not in the manual?

Huawei WiFi Q2 Specifications

General IconGeneral
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1167 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
WLAN data transfer rate (second band)867 Mbit/s
Product typeTabletop router
Product colorWhite
Ethernet LANYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Memory card slot(s)No
Ethernet LAN (RJ-45) ports3
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Power consumption (typical)24 W
Processor modelRealtek RTL8197F + Realtek RTL8812BR + Hisilicon Hi5630 + HiSilicon Hi1151
Security algorithmsAES, TKIP, WPA-PSK, WPA2-PSK
DSL WAN-
WAN connection typeRJ-45
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Cables includedAC, LAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth75 mm
Width112 mm
Height183.5 mm
Weight495 g

Related product manuals