Huawei WiFi Mesh 3 - Indicator Status; Understanding Indicator Lights

8
Indicator
Steady blue: Connected to the Internet.
Steady red: Not connected to the Internet.
Flashing: The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect)
are detected, the indicator on the HUAWEI WiFi Mesh 3 will
ash. When this happens, press the HUAWEI WiFi Mesh 3's
H button. The indicator should ash quickly, indicating that the
pairable device is connecting to the HUAWEI WiFi Mesh 3.
The connection process is complete when the indicator stops
ashing.
• If you touch the
H
button accidentally, wait for approximately
two minutes and the indicator will be back to normal
automatically.
• The
H
button also features WPS functionality.
For the router that is connected to the modem:
• Ensure that the Ethernet cable is not loose and connected
correctly.
• Contact your carrier to check for any network failure.
For the router(s) that is/are not connected to the modem:
• Ensure that the distance between two routers is less than 10
meters and there are no more than ome wall in between.