Huawei WS7200

10
6. How do I connect a Wi-Fi device to my router using WPS?
When your router is powered on, touch its
H
button, and then
press the
WPS
button on the Wi-Fi device (such as a phone)
within two minutes to initiate standard WPS negotiation and
connect the Wi-Fi device to the router's Wi-Fi network.
Step 2: When the indicator on the HUAWEI WiFi Mesh starts
to ash, touch the H button on it. Wait until the indicator on
the add-on router shows it is connected to the network.
The following HUAWEI device models are supported: WS5800,
WS7100 and WS7200. For details about more device models,
see the device manual.
7. How do I use the NFC function of the router to quickly
connect to the Wi-Fi network?
Unlock your phone, enable NFC on it, and touch the NFC
area on the back against the NFC area on the router, then
follow the onscreen instructions to connect the phone to the
Wi-Fi network.
This feature is available on Android devices that support NFC,
but some devices with non-standard NFC may be unable to
connect. iOS devices do not support connecting through NFC.