Huawei Y8p - Bluetooth

4 Hold the NFC sensor (located near the rear camera) of your phone against that of a POS
terminal to enter the payment screen automatically. Complete the payment with a
password or ngerprint.
Wireless Projection
You can wirelessly connect your phone to an external display (for example, a TV).
1 Based on the model and functions of your external display, do the following:
• If the external display supports Miracast, enable wireless projection on it.
• If the external display does not support Miracast, use a wireless HDMI adapter to
connect your phone and external display. Ensure that the wireless HDMI adapter is
connected to a power supply.
To check whether your external display supports Miracast and how to enable wireless
projection on it, consult the user guide or customer service of the external display
manufacturer.
2 On your phone, swipe down from the status bar to open the
notication panel, and touch
to enable Wi-Fi.
3 Swipe down again to show all shortcuts and enable Wireless Projection. Your phone will
start searching for external display devices.
Alternatively, go to
Settings > More connections and enable Wireless Projection.
4 Touch the name of the external display on the search result list to start the projection.
If you are using a wireless HDMI adapter, touch its name to start the projection.
Huawei Beam
You can hold the NFC sensors of two Huawei devices against each other to quickly transfer
data between them, without the need to pair the devices or even having to touch to conrm.
Enable Read and write/P2P on the NFC settings screen if available. This feature may
vary depending on your carrier.
1 Go to Settings > More connections and enable NFC and Huawei Beam on the
devices of both the sender and recipient.
2 On the sending phone, touch and hold a
le, select the les you want to share, touch ,
and select Huawei Beam.
Operations may vary if you are sharing les from apps directly.
3 Keep the two phones unlocked and the screen turned on, then hold the NFC sensors
(located around the rear camera) of the two devices together until a beep is heard and
the sharing screen shrinks, which indicates that the connection was successful and the
les have started transferring.
Once the transfer has started, you can separate the two devices slightly, but keep
them within 10 cm (4 in.) of each other.
Settings
72