• Reset App Lock: Go to > Disable App Lock > DISABLE. This will cancel all locks, and
clear all App Lock settings.
Smart Unlock
Smart Unlock enables you to unlock your phone with a Bluetooth device, like a smart band.
When a compatible Bluetooth device is detected, you can unlock your phone with a simple
swipe.
1 Go to Settings > Biometrics & password > Smart Unlock.
2 Touch Step 1: Set an unlock method, and follow the onscreen instructions to set the lock
screen password. If a lock screen password has been set, skip this step.
3 Touch Step 2: Add a Bluetooth device, enable Smart Unlock, touch
, then pair a
Bluetooth device, like a smart band.
4 On the Smart Unlock settings screen, touch Paired devices, then follow the onscreen
instructions to set this device as the Unlocking device.
To learn more about Smart Unlock, touch on the Smart Unlock settings screen.
Set a SIM PIN Lock
A PIN is the identity code of a SIM card, and can be set as the SIM card lock. After doing so,
you will be required to enter the correct PIN to unlock the SIM card every time you power on
your device or switch to a new phone to prevent unauthorized access.
You need to obtain the PIN of your SIM card from your carrier before using this function.
1 Go to Settings > Security > More settings > Encryption and credentials to enter the
SIM lock setup screen.
2 Enable Lock SIM card, enter the PIN code, and then touch OK.
To modify the PIN, touch Change SIM PIN and follow the instructions.
• You will have to enter a PIN Unlocking Key (PUK) to unlock the SIM card if you exceed
the maximum number of failed attempts to enter the PIN. A new PIN needs to be set
up once you successfully unlock your SIM with a PUK. Should you also exceed the
maximum number of failed attempts to enter the PUK, your SIM card will be blocked.
• The PUK can only be obtained from your carrier.
Pin a Screen
You can pin the screen of an app so you can stay focused on it. Try this feature when playing
games, watching videos, and more.
Go to Settings > Security > More settings > Screen pinning, and enable Screen
pinning.
Settings
91
To Next Page
Loading...
