Need help?Do you have a question about the Huazheng HZJY-10K-I and is the answer not in the manual?
General| Model | HZJY-10K-I |
|---|---|
| Waveform Distortion Rate | ≤3% |
| Working Time | Continuous |
| Power Supply | AC 220V ±10%, 50Hz/60Hz |
| Output Voltage | 10kV |
| Current Accuracy | ±1% |
| Input Voltage | AC220V±10%, 50Hz |
| Applicable Standards | IEC60065, IEC60335, IEC60950, IEC60598, GB4706.1, GB8898, GB4943, GB7000.1 |
Describes the layout and components of the instrument's front panel.
Explains the function of each key on the instrument's front panel.
Details how to set up voltage, current, and filter parameters on the interface.
Explains how to measure Dielectric Absorption Ratio (DAR) using the instrument.
Explains how to measure Polarization Index (PI) using the instrument.
Provides important points to consider for proper test connections and grounding.
To Next Page
