12
Dismantle and cleaning of Night Light Cover
3. After cleaning is done, move the cover back to the original position.
4. Make sure the cover sits properly on the main body. Follow the “close”
mark to turn clockwise the cover until the catches lock.
Importance:
• Wipe the dusts and dirt with detergent slightly moistened cloth or use
water to clean once a month
• Re-assemble the unit only after all parts are completely dry
• Use dilute neutral detergent to do the cleaning.
• Never use abrasive, aggressive, or flammable cleaning agents such as
bleach or alcohol to clean any part of the appliance. Otherwise, it will
cause discoloration or deformation.
To Next Page