Huck AK-175 - LIMITED WARRANTIES

LiMited WarrantieS
Tooling Warranty: Huck warrants that tooling and other
items (excluding fasteners, and hereinafter referred as
“other items”) manufactured by Huck shall be free from
defects in workmanship and materials for a period of
ninety (90) days from the date of original purchase.
Warranty on “non standard or custom manufactured
products”: With regard to non-standard products
or custom manufactured products to customer’s
specications, Huck warrants for a period of ninety
(90) days from the date of purchase that such products
shall meet Buyer’s specications, be free of defects in
workmanship and materials. Such warranty shall not be
effective with respect to non-standard or custom products
manufactured using buyer-supplied molds, material,
tooling and xtures that are not in good condition or
repair and suitable for their intended purpose.
THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF.
HUCK MAKES NO OTHER WARRANTIES AND
EXPRESSLY DISCLAIMS ANY OTHER WARRANTIES,
INCLUDING IMPLIED WARRANTIES AS TO
MERCHANTABILITY OR AS TO THE FITNESS OF
THE TOOLING, OTHER ITEMS, NONSTANDARD OR
CUSTOM MANUFACTURED PRODUCTS FOR ANY
PARTICULAR PURPOSE AND HUCK SHALL NOT BE
LIABLE FOR ANY LOSS OR DAMAGE, DIRECTLY
OR INDIRECTLY, ARISING FROM THE USE OF
SUCH TOOLING, OTHER ITEMS, NONSTANDARD
OR CUSTOM MANUFACTURED PRODUCTS OR
BREACH OF WARRANTY OR FOR ANY CLAIM FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Huck’s sole liability and Buyer’s exclusive remedy for
any breach of warranty shall be limited, at Huck’s option,
to replacement or repair, at FOB Huck’s plant, of Huck
manufactured tooling, other items, nonstandard or
custom products found to be defective in specications,
workmanship and materials not otherwise the direct or
indirect cause of Buyer supplied molds, material, tooling
or xtures. Buyer shall give Huck written notice of claims
for defects within the ninety (90) day warranty period for
tooling, other items, nonstandard or custom products
described above and Huck shall inspect products for
which such claim is made.
Tooling, Part(s) and Other Items not manufactured by
Huck.
HUCK MAKES NO WARRANTY WITH RESPECT
TO THE TOOLING, PART(S) OR OTHER ITEMS
MANUFACTURED BY THIRD PARTIES. HUCK
EXPRESSLY DISCLAIMS ANY WARRANTY
EXPRESSED OR IMPLIED, AS TO THE CONDITION,
DESIGN, OPERATION, MERCHANTABILITY OR
FITNESS FOR USE OF ANY TOOL, PART(S), OR
OTHER ITEMS THEREOF NOT MANUFACTURED BY
HUCK. HUCK SHALL NOT BE LIABLE FOR ANY
LOSS OR DAMAGE, DIRECTLY OR INDIRECTLY,
ARISING FROM THE USE OF SUCH TOOLING,
PART(S) OR OTHER ITEMS OR BREACH OF
WARRANTY OR FOR ANY CLAIM FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES.
The only warranties made with respect to such tool,
part(s) or other items thereof are those made by the
manufacturer thereof and Huck agrees to cooperate with
Buyer in enforcing such warranties when such action is
necessary.
Huck shall not be liable for any loss or damage resulting
from delays or nonfulllment of orders owing to strikes,
res, accidents, transportation companies or for any
reason or reasons beyond the control of the Huck or its
suppliers.
Huck Installation Equipment
Huck International, Inc. reserves the right to make
changes in specications and design and to discontinue
models without notice.
Huck Installation Equipment should be serviced by
trained service technicians only.
Always give the Serial Number of the equipment when
corresponding or ordering service parts.
Complete repair facilities are maintained by Huck
International, Inc.
Authorized Tool Service Centers (ATSC’s) offer repair
services, spare parts and Nose inserts and accessories.
Please contact your Huck Representative or the nearest
Huck ofce listed on the back cover for the ATSC in your
area.
AK-175 Series Tools (HK1057) Arconic Fastening Systems and Rings