Ver 1.2 7/15
Installation Instructions………………………………………………………………………
Desktop Installation………………………………………………………………………………
When using the HuddleCam on a desk, Make sure that it will stand level. If you want to
use the camera on an incline, make sure the angle is less than 15 degrees to ensure
that the camera’s pan and tilt mechanism operates normally.
Tripod Installation…………………………………………………………………………………
When using the HuddleCamwith a tripod, screw the tripod to the bottom of the cam-
era. The tripod screw must fit below specifications:
Note: Tripod must stand on a level surface.
To Next Page
Loading...
