Need help?Do you have a question about the HuddleCamHD 3X and is the answer not in the manual?
General| Megapixel | 2.1 MP |
|---|---|
| Sensor type | CMOS |
| Optical zoom | 3 x |
| Focal length range | 3 - 10 mm |
| Optical sensor size | 1/2.7 \ |
| Number of camera presets | 64 |
| Horizontal field of view (tele) | 36 ° |
| Horizontal field of view (wide) | 82 ° |
| Input current | 2 A |
| DC input voltage | 12 V |
| Power source type | DC |
| Operating temperature (T-T) | 0 - 45 °C |
| Maximum frame rate | 30 fps |
| Supported video modes | 720p, 1080p |
| Maximum video resolution | 1920 x 1080 pixels |
| Resolution at capture speed | 1920x1080@30fps |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Cables included | Serial, USB |
| USB cable length | 4.8 m |
| Power supply included | Yes |
| Pan range | 0 - 340 ° |
| Mounting type | Stand |
| Product color | White |
| Tilt angle range | -90 - 30 ° |
| Certification | ISO9001: 2008 |
| USB 2.0 ports quantity | 1 |
| Package type | Box |
| Package depth | 178 mm |
| Package width | 222 mm |
| Package height | 225 mm |
| Package weight | 1660 g |
Weight and Dimensions| Depth | 120 mm |
|---|---|
| Width | 124 mm |
| Height | 145 mm |
| Weight | 750 g |
Read manual, avoid damage from stress, vibration, liquid, voltage, and electromagnetic sources.
Lists supplied equipment: camera, power adapter, tripod mount, USB cable, serial cables, remote, manual.
Identifies lens, IR receivers, and power LED on the front of the camera.
Details DC IN, IR Receiver, VISCA IN, VISCA Out/RS485, and USB 2.0 interface ports.
Describes the 1/4-20 bolt thread for tripod or mount attachment.
Used for selecting serial and IR communications settings.
Details SW1 switch states for setting RS232 addresses and broadcast/test modes.
Configuration for baud rate, communication mode (RS-232/RS-485), and protocol (VISCA/PELCO-D).
Settings for IR remote control address based on DIP-4 and DIP-5.
Settings for IR output (Disabled/Enabled) using SW2 DIP-6.
Pinout and function details for the VISCA RS-232C IN connector.
Pinout and function details for the VISCA RS-232C OUT connector.
Explains resetting, selecting camera ID, and managing preset positions with the remote.
Details how to control pan, tilt, and zoom speed with the remote controller.
Covers functions like Freeze, WB, AE, HDMI/DVI output, and power control.
Functions related to OSD menus, slow zoom, and focus control via remote.
Details L-Limit, Scan, R-Limit, Home, Tour, and Rev functions.
Steps to connect the camera to a PC via USB and power.
Instructions for cleaning the camera lens with a blower.
Guidance on placing the camera on a desk and ensuring stability.
Instructions for mounting the camera on a tripod using the appropriate screw.
Details sensor, frame rate, zoom, min lux, FOV, and warranty.
Specifications for pan, tilt rotation, and preset capabilities.
Details rear board connectors, power, material, dimensions, and weight.
To Next Page
