3
Safety and Caution
Information
Temperature
This device is intended for use in ambient temperatures between 0 °C and
35 °C (32 °F and 95 °F). Avoid using or storing next to heat sources, in
direct sunlight, or outside the intended temperature ranges.
Modify
Modication to thermal solution, device components or enclosure shall
violate regulatory compliance requirements and may induce safety hazards.
User Instructions
The USB Adapter is made to easily connect an Ethernet device to a host
computer using USB-C. The USB Adapter can also provide 37-57V DC
power to a connected Ethernet device. The USB Adapter can be powered
with AC adapter and USB C 5V DC.
Installation
Connect the Ethernet device and the USB Adapter using minimum a Cat5e
rated Ethernet cable. Further connect the USB Adapter to a USB host and
also connect the external power adapter to USB Adapter that included in
the package.
The status LED will light up after the unit has booted. The LED will be red
until the unit is ready to stream video from a connected network camera.
When streaming is ready, the LED will turn white.
A wall mount bracket with double sided tape is included. To install the
bracket, remove the tape liner and place the bracket in a suitable position,
not higher than 2m, and on a clean smooth surface.
To Next Page
Loading...