4
Attach the USB Adapter to the wall mount bracket and ensure that the unit
is properly locked in position around the mounting plate. Magnetic surfaces
can generally be used to mount the USB Adapter. Optionally, place the
Adapter directly on any horizontal surface.
The wall bracket is designed to hold the Huddly USB Adapter only. It should
not be used as support for any additional weight.
Power
Input
Minimum requirements:
USB Vbus 5V >0.5A
The USB Adapter will enable Power over Ethernet functionality when
the following input requirements are met.
USB host 5V 3A, and
external DC adapter 5V 4A
Use only the included Cincon TRE25R050-35G02 VI or CUI SMM30-5-
RV-C AC/DC adapter. Other AC/DC adapters are not supported.
Output
Voltage range: 48V DC Maximum current: 0.35A
Recycling
At the end of life for this product, local rules and regulations shall be
followed. This product is ment to be recycled, and if applicable and/or
possible, should be handed in to a collection point for recycling purposes.
To Next Page
Loading...