Hudson Tuf-Lite 5000 Series

To Next Page

Installation Manual 5000 Page 1 of 8 April 2010

INSTALLATION MANUAL

Adjustable Pitch Fan Assembly

22’ thru 30’ Diameter

Tuf-Lite

and

Tuf-Lite II

Fans

5000 Series Hub

Hudson Tuf-Lite

and Tuf-Lite II

fan blades

Hudson Tuf-Lite

(black) fan blades are made from fiberglass reinforced epoxy resin having a very high

strength-to-weight ratio and corrosion resistance (not shown).

Hudson Tuf-Lite II

(white, prev. blue***) fan blades are made from fiberglass reinforced vinyl-ester resin

having a very high strength-to-weight ratio and superior ultra-violet and corrosion resistance. An elastomeric

blade/holder joint cover (not shown) prevents moisture from entering the blade (shown above).

The individually balanced blades can be replaced independently – matched sets are not required.

Main Page

Need help?

Do you have a question about the Hudson Tuf-Lite 5000 Series and is the answer not in the manual?

Summary

Adjustable Pitch Fan Assembly

Hudson Tuf-Lite and Tuf-Lite II Fan Blades

Details materials and properties of Tuf-Lite fan blades, including strength and corrosion resistance.

Recommended Tools

Installation Procedures

Assembly with Bushing

Steps for assembling the fan hub with a bushing onto the shaft, including torque values.

Assembly with Straight Shaft (No Bushing)

Instructions for mounting the hub on a straight shaft without a bushing, including key installation.

Assembly with Tapered Shaft (No Bushing Required)

Guide for attaching the hub to a tapered shaft, specifying fasteners and torque values.

Thrust Retainer Installation

Blade Installation

Set Pitch and Track

Check Track

Seal Disc Assembly & Installation

Operating Instructions

Checking Tip Clearance

Parts List

Standard Materials & Finishes