Hudson Tuf-Lite III 5000 Series User Manual

Tuf-Lite III
®
5000 Series Installation Manual Page 1 of 8 May 2006
Tuf-Lite III
®
Fans
5000 Series Hub
INSTALLATION MANUAL
Adjustable Pitch Fan Assembly
22’ thru 30’ Diameter
Hudson Tuf-Lite III
®
fan blades
Hudson Tuf-Lite III
®
fan blades are of single piece fiberglass reinforced plastic (FRP) construction
optimized for performance, reliability, noise, and cost effectiveness. Tuf-Lite III
®
fan blades are constructed
of light weight, corrosion-resistant, fiberglass reinforced vinyl-ester resin, with materials, thickness, and
processes determined from finite element analysis modeling. Tuf-Edge
®
leading edge erosion and UV
protection is a standard with this blade.
The individually balanced blades can be replaced independently — matched sets are not required.

Hudson Tuf-Lite III 5000 Series Specifications

General

Brand	Hudson
Model	Tuf-Lite III 5000 Series
Category	Fan
Language	English

Summary

Product Overview

Adjustable Pitch Fan Assembly 22' thru 30' Diameter

Details the fan assembly with adjustable pitch for specific diameter ranges.

Tuf-Lite III® Fan Blades

Description of single-piece fiberglass reinforced plastic (FRP) fan blades.

Recommended Tools

Installation Procedures

Assembly with Bushing

Step-by-step guide for assembling the hub with a bushing.

Assembly with Straight Shaft

Instructions for installing the hub on a straight shaft without a bushing.

Assembly with Tapered Shaft

Process for mounting the hub on a tapered shaft.

Component Installation & Setup

Thrust Retainer Installation

Guide for installing the optional thrust retainer.

Blade Installation

Procedure for assembling fan blades to the hub.

Set Pitch and Track

How to set the blade pitch angle and track.

Post-Installation Checks

Seal Disc Assembly & Installation

Instructions for installing the seal disc to prevent air recirculation.

Check Track

Verifying blade track alignment after installation.

Operational Guidelines

Checking Tip Clearance

How to check and adjust fan blade tip clearance.

Operating Instructions

Guidance on starting the fan and monitoring performance.

Reference & Ordering

Parts List

Detailed list of fan assembly components and part numbers.

Standard Materials & Finishes

Information on materials used for fan components.

Ordering Information

Guide on specifying fan diameter, type, blades, and shaft.