Huffy freewheel - Page 20

20
Brake System Setup - continued
4. Rotate Housing (4-1) Groove
away from Cable Groove (4-2)
and tighten Housing Nut (4-3).
4-3
4-2
4-1
4
5. Squeeze Brake Arms (5-1) so that
Brake Pads (5-2) are against the
Rim.
5
5-1
5-25-2
6. Pull Brake Cable (6-1) tight.
• Tighten Cable Nut (6-2).
• Adjust Cable Nut (6-3) for 1/16”
Brake Pad clearance.
6-3
6-2
6
6-1
1/16” 1/16”
Bicycle Assembly