Huffy Green Machine User Manual

Owner’s Manual
This manual contains important safety, assembly,
operation and maintenance information.
Please read and fully understand this manual before
operation.
Save this manual for future reference.
HGM-G-9 20 EN-AU 091515 m0301
Copyright Huffy Corporation 2015
Date Code Label
Here
EN
AU

Huffy Green Machine Specifications

General

Frame Material	Steel
Drift Capability	Yes
Type	Drift Trike
Seat Type	Bucket Seat
Color	Green

Summary

Owner's Model Identification Record

Warning and Safety Information

General Safety Warnings

Crucial safety guidelines and precautions for riding the product.

Assembly Warnings

Specific safety notes related to product assembly and checks.

Assembly Notes

Required Tools

Lists the tools necessary for assembling the product.

Suggested Handling Methods

Illustrates safe ways to handle the product during assembly.

Steering your Green Machine

Steering Function

Explains how to operate the steering levers and practice steering.

Leaning into a Turn

Lean into a Turn Warning

Warns about the importance of leaning correctly to prevent rollovers.

Coaster Brakes

Coaster Brake Operation

Details how to operate the coaster brake and safety checks.

Assemble Front Frame to Rear Frame

Frame Assembly Steps

Provides step-by-step instructions for joining the front and rear frame sections.

Steering Arms

Steering Arms Check

Notes that steering arms are pre-assembled and require periodic bolt checks.

Attaching Steering Linkage - Front

Front Linkage Installation

Details the steps for connecting the front steering linkage rods.

Attaching Steering Linkage - Rear

Rear Linkage Installation

Describes how to connect the steering rods to the rear axle assembly.

Assemble Rear Steering Axle

Rear Axle Assembly

Instructions for assembling the rear steering axle, including pivot bolt and locknut.

Installing Pivot Bolt Cover

Pivot Bolt Cover Installation

Steps for placing and securing the cover over the rear axle pivot bolt.

Installing Rear Wheels

Rear Wheel Mounting

Guides on how to install the rear wheels using either bolt or threaded rod styles.

Installing Seat

Seat Mounting and Adjustment

Instructions for attaching the seat and adjusting its position for rider comfort and brake access.

Installing Pedals

Pedal Installation

Steps for correctly installing the left and right pedals into the crank arms.

Repair and Service

General Maintenance Warnings

Warnings regarding frequent inspection, part replacement, and fastener tightening.

Torque Chart

Provides recommended torque values for various fasteners and pedals.

Tires

Tire Maintenance

Advice on checking tire pressure, inflation methods, and replacing worn tires.

Tire Pressure Table

A table showing recommended tire pressures in PSI and Kpa.

Tire and Tube Replacement

Removing Existing Tire and Tube

Step-by-step guide on how to remove the old tire and inner tube.

Installing New Tire and Tube

Instructions for fitting a new tire and tube, including inflation.

Lubrication

Lubrication Warnings

Important warnings about avoiding over-lubrication and keeping oil off contact surfaces.

Lubrication Table

A table specifying what parts to lubricate, when, and how.

Inspection of the Bearings

Wheel Bearings Check

How to check if the wheel bearings are spinning freely and are properly adjusted.

Limited Warranty

General Warranty Information

Details on the warranty's scope, limitations, and consumer rights.

Warranty Exclusions

Lists conditions under which the limited warranty becomes void.

Limited Warranty - continued

Contacting Customer Service

Information on how to report problems and submit warranty claims.

Warranty Duration

Specifies the length of the limited warranty for different parts.

Helmet Safety and Usage

Helmet Fitting and Use

Instructions on how to properly fit, adjust, and wear a helmet.