5
Warnings and Safety
Warning and Safety Information - continued
• Do not pull any objects with the product.
• Do not push the product.
• Never ride with more than one person. Maximum weight is 180 lbs (82Kg).
• Excessive weight may cause a hazardous or unstable condition.
• Understand all operating procedures before riding.
• Do not add a motor to the product.
• Do not modify the product.
• Before each ride check all screws, fasteners and brakes; re-tighten any that are
loose. Replace any fasteners that are damaged.
• Handlebar hand grip or tube end plugs should be replaced if damaged as bare
tubes have been known to cause injury. All products with capped handlebar ends
should be checked regularly to ensure that adequate protection for the ends of the
handlebars are in place.
• Replacement forks must have the same rake and tube inner diameter as the origi-
nal product.
• Know your limits. Be familiar with your abilities. Use common sense.
• Replace worn or broken parts immediately.
• If anything does not operate properly, discontinue use.
IF YOU HAVE ANY QUESTIONS REGARDING THE OPERATION OF THIS
PRODUCT, PLEASE REFER TO THIS OWNERS MANUAL OR CALL
CONSUMER SERVICE
ASSEMBLY WARNINGS:
Wheels, Tire & Axle:
• The rear axle nuts must be securely
tightened to ensure rear wheels do not
come loose from the axle.
• All hardware must be sufciently tight-
ened to ensure it does not come loose.
• Recommended tube/tire ination pres-
sure is on the tire sidewall.
Pivot Bolt:
• Pivot bolt must be correctly and se-
curely installed to ensure it does not
come loose.
Steering Function:
• Ensure the Steering Levers move
freely, front to back and all attaching
hardware is securely tightened.
Seat:
• Secure the seat adjustment bolts each
time the seat is moved.
Coaster Brake:
• Ensure seat is adjusted so rider can
easily reach the front wheel coaster
brake.
To Next Page
Loading...
