ABOUT DUAL USB-A OUTPUT PORTS:
ABOUT 12V DC OUTPUT PORT (MAX 15V/10A)
USB-A USB-A
1.Plug the cable into the USB-A output port. 2.Press the Power Button.
ABOUT PRE-HEAT TECH
1.Insert the jumper cable into
the jump starter and connect
the clamps to the car battery.
2.The Pre-Heat Function will operate
automatically and the icon will be
displayed on the screen when
the detected temperature is below
the ideal operating temperature.
3.The screen will show "READY"
after preheating , then start your
car engine.
1.Plug the 12V cigarette lighter
socket adapter into the 12V DC
output port.
2.Connect your 12V DC appliances to
the ciga-rette lighter adapter.
3.Press the Power Button.
12V DC
ABOUT LED FLASHLIGHT
1.Hold the Flashlight Button for 1-2s.
2.Press briefly to switch the light modes.•50% Lumen Light → 100% Lumen Light → White
Strobe Light → White SOS Light → Red Strobe Light
Flashlight
Button
CONTACT US
https://support.hulkman.com 46 Smith Alley, Suite 200 Pasadena, CA 91103 +1 (877) 892-9703 service@hulkman.com
To Previous Page
Loading...
Need help?
General
