EasyManua.ls Logo

Hülsta GENTIS SLEEPING - Usable Bed Inside Height and Space under Bed

Hülsta GENTIS SLEEPING
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Schlafen: GENTISE 1. 2021
Note on usable bed inside height:
The support slats of the hülsta beds are delivered in the centre position, i.e. they can be adjusted by 3.2 cm upwards and downwards. If the slats are set in the lowest position, the
maximum usable bed inside height is achieved.
In the case of some beds, the bed inside height is comparatively low. This means that mattresses in combination with base frames that are somewhat higher are not held so well by
the bed side sections. Please note that the usable bed inside height of beds with height adjustable support slats is reduced when these are set higher.
This is how to calculate the individual height from the data supplied with the base frames:
Note on space under bed:
The storage space underneath the base frame is calculated from the bed height minus the usable bed inside height.
Example bed: 42.2 cm - 18.0 cm = 24.2 cm.
Max. usable bed inside height:
18.0 cm
approx. 12.5 cm for holding
mattress
5.5 cm total height of base frame
(example: hülstaflex basic B)
Example: bed and hülstaflex basic B base frame
(back and foot sections adjustable)
Usable bed inside height and space under bed
{