What to do if my Human Measuring Instruments device is not operating according to its optical specifications?
If your Human Measuring Instruments device isn't operating according to its optical specifications, try changing to a HUMAN reagent and avoid extreme samples. Also, protect the device from sunlight. If these steps don't resolve the issue, consider replacing the device.
What to do if the electrical power is not sufficient for my Human HumaClot Junior?
If your Human Measuring Instruments device isn't getting enough electrical power, use the original power supply. If your device uses a battery pack, ensure it is charged.
What to do if temperature is out of range for my Human HumaClot Junior?
If the temperature is out of range for your Human Measuring Instruments, wait a few minutes. If the error continues, further assistance may be needed.
What to do if the signal change is too small in Human Measuring Instruments?
If the signal change is too small with your Human Measuring Instruments, try to pipette forcefully and quickly, or start measurement by pressing the key Z.W0>%\ after adding the reagent.
What to do if signal noise and temperature drift start the measurement incorrectly on Human HumaClot Junior Measuring Instruments?
If signal noise and temperature drift are causing incorrect measurements on your Human Measuring Instruments, stop the measurement and activate the optic shortly before starting.
General| Brand | Human |
|---|---|
| Model | HumaClot Junior |
| Category | Measuring Instruments |
| Language | English |
Details the intended use of the HumaClot Junior with human plasma and safety measures for handling biological materials and spills.
Lists software revisions, modifications, and release dates for the HumaClot Junior.
Details revisions and editions of the service manual document itself.
Identifies key components visible on the front panel of the HumaClot Junior, including display and keyboard.
Details components on the rear panel such as power input, RS232 port, and identification labels.
Explains the function of each button on the HumaClot Junior's front panel, including power, cursor, and test selection.
Describes the meaning of the LED indicators and symbols on the front panel for status and errors.
Guidance on placing the instrument in a suitable environment and connecting the power supply.
Details the components included in the standard delivery and a list of available consumables.
Provides detailed technical specifications including dimensions, weight, power, interface, and optic cell.
Lists the safety and quality standards the manufacturer adheres to, such as ISO 9001 and ISO 13485.
Explains the instrument warm-up process, including LED indicators and readiness status.
Guides the user on how to select tests and operate the instrument for measurements.
Describes how to use the stopwatch function and enter calibration parameters via the menu.
Lists the standard default values for various tests like PT, PTT, FIB, FAC, DD, AT, and PC.
Step-by-step guide on how to perform a measurement, activate the optic, and interpret results.
Explains how to stop a measurement and the behavior of the autostart feature for different tests.
Instructions on how to enter the hidden service submenu using specific key combinations.
Lists the service functions available, including resetting defaults, temperature, and optic adjustments.
Details stored calibration values, default settings for temperature, OD correction, and coag correction.
Guides on how to adjust and verify the incubation block temperature to the correct setting.
Explains how to correct optical density measurements using a factor for adapting reagents.
Details how to apply a coagulation correction factor for better correlation with other systems.
Covers performing an optic check for troubleshooting and configuring the RS232 interface for data transfer.
Lists common system error messages, their interpretation, and corrective actions for the HumaClot Junior.
Addresses issues like measurement not starting, incorrect starts, and 'No Clot Detect' or too short clotting times.
Details potential causes and actions for when the clotting time is measured as too long.
Provides detailed steps for disassembling the HumaClot Junior, including screw removal and cable disconnection.
Describes how to remove the display module and the heating block assembly from the instrument.
Illustrates the layout of the system board, microcontroller, and connection points.
Details the process of reassembling the instrument, running functional tests, and performing temperature checks.
Lists part numbers (REF) for various components and their corresponding product descriptions.
Presents a 3D exploded view of the instrument, identifying major components with numbers.
To Next Page
