%./01/02
1 REVISIONS 4
1.1 Software 4
1.2 Service Manual (Document) 4
2 INSTRUMENT VIEWS 5
3 INSTALLATION 7
3.1 Equipment 7
3.2 Technical Data 8
3.3 Safety Standard Approvals 8
4 OPERATION INSTRUCTION 9
4.1 Warm Up 9
4.2 Test Selection 9
4.3 Stop Watch 10
4.4 Calibration 10
4.5 Default Test Values 11
4.6 Measurement 12
4.7 Measurement Stop 12
4.8 Autostart 12
5 SERVICE 13
5.1 Service Functions 13
5.2 Total Default Values 14
5.3 Temperature Adjustment 15
5.4 Optic Adjustment 16
5.4.1 OD Correction 16
5.4.2 COAG CORRECTION 16
5.4.3 OPTIC CHECK 17
5.4.4 Interface RS232 17
6 TROUBLESHOOTING GUIDE 18
7 DISASSEMBLY / ASSEMBLY 20
7.1 Disassembling the Instrument 20
7.2 Assembling the Instrument 23
8 SPARE PARTS 24
9 TECHNICAL DRAWING (3D-EXPLOSION) 25
To Next Page
