Humanscale Quickstand - PARTS REQUIRED; Single QuickStand Parts; Additional Parts for Dual Monitor QuickStand; Tools Required

PARTS REQUIRED
Single QuickStand Parts
A (1) QuickStand Unit
B (1) Base Plate
C (1) Platform
D (1) Palm Support
E (1) VESA Plate
F (6) M8 x 18 mm Flat Head Machine Screws
G (4) M4 x 18 mm Pan Head Phillips
H (4) M4 x 8 mm Pan Head Phillips
I (4) VESA Spacer
Additional Parts for Dual Monitor QuickStand
J (1) Dual Monitor Crossbar
K (1) M6 x 22 mm Flat Head Machine Screws
L (2) M5 x 18 mm Flat Head Machine Screws
M (2) VESA Plate
N (8) M4 x 18 mm Pan Head Phillips
O (8) M4 x 8 mm Pan Head Phillips
P (8) VESA Spacer
3 mm Hex Key (supplied)
4 mm Hex Key (supplied)
5 mm Hex Key (supplied)
6 mm Hex Key (supplied)
Box Knife
Tape Measure
#2 Phillips Screwdriver
Flat-Head Screwdriver
A
E
F
M
J
K
G
L
H
N
I
O
P
B
C
D
Hardware
Tools Required
www.humanscale.comCustomer Service: N America +1 800 400 0625 / International +353 (0)1 858 0910