Operation
61
Coupling
1
2
3
4
5
6
7
8
Fig. 37 Height equalisation / alignment
1 Tube drawbar - height
2 Geared support winch
If necessary, correct the tube drawbar
setting (Fig. 37/1) by means of the
geared support winch (Fig. 37/2).
Fig. 38 Height equalisation / alignment
1 Crank down geared support foot
2 Crank up geared support foot
Crank the foot of the geared support
winch (Fig. 38/1) down or up
(Fig. 38/2).
Do an optical check to ensure the
trailer is as horizontal and level as
possible.
Fig. 39 Driving up
1 Towing eye
2 Pin coupling (catcher)
3 Central axis
Reverse the towing vehicle until there
is about 1 m distance between the
coupling and the towing eye.
Approach as straight and precisely as
possible, not at an angle to the pin
coupling.
If necessary, correct the position of
the trailer compared to the towing
vehicle.
If necessary, ask an instructor for
help.
1
2
1
2
1
2
3
To Next Page
