Raising and lowering system for height equalisation (option)
86
Operation: chassis
4
Moving the trailer to the drive position
WARNING
Driving with the turning lever not in
the drive position
Risk of accident due to the permissible
trailer drive height being exceeded.
Check before driving that the turning
level is in the drive position (centre
position).
Fig. 28 Turning lever in drive position
1 Turning lever extended
2 Drive position (centre position)
If the turning lever (Fig. 28/1) is in drive
position (Fig. 28/2), it is pulled out and
cannot be turned.
The raising/lowering valve is equipped
with a safety function, a so-called
"Stop position".
Bring the turning lever
(Fig. 28/1) into drive position before
starting the journey.
You must only drive with the trailer in
this position.
1
2
To Next Page
Loading...
