5. Pull up on the release
lever labeled 1 and then
pull up on the seatback
until the seatback locks
into the upright
position.
Removing the Seat
To remove the seat:
1. Open the liftgate.
Notice: Folding a rear seat with the safety belts
still fastened may cause damage to the seat or the
safety belts. Always unbuckle the safety belts
and return them to their normal stowed position
before folding a rear seat.
2. Fold the seatback
forward onto the seat
cushion by using
the lever labeled 1.
The seat cannot be
removed unless the
seatback is folded.
3. Pull up on the release
lever labeled 2, at the
rear of the seat, to
unlatch the rear of the
seat from the floor, and
lift the rear of the seat
up from the floor.
1-17
To Next Page
Loading...
