Need help?Do you have a question about the Humminbird 346c DI and is the answer not in the manual?
General| Display Size | 3.5 inches |
|---|---|
| Display Type | Color TFT |
| Display Resolution | 320 x 240 |
| Sonar Frequency | 200 kHz / 455 kHz |
| Target Separation | 2.5 inches |
| Depth Capability | 600 feet |
| Down Imaging | Yes |
| GPS | No |
| Frequency | 200 kHz / 455 kHz |
| Waterproof Rating | IPX7 |
| Display Pixel Matrix | 320 x 240 |
| Sonar Type | DualBeam PLUS with Down Imaging |
Explains the Down Imaging™™ technology, its razor-thin beams, and frequencies.
Details the optional XI 9 20 Ice Transducer and its selectable dual-frequency sonar.
Explains the function of the POWER/LIGHT key for powering on/off and adjusting display.
Describes how to use the VIEW key to cycle through available display views.
Details how to access the Start-Up, X-Press™, and Main Menu systems.
Explains the multiple functions of the 4-WAY Cursor Control key for navigation and selection.
Outlines the EXIT key's functions for canceling alarms, exiting menus, and cycling views.
Explains that the display shows sonar returns over time, not a literal 3D representation.
Describes the RTS Window's function for displaying depth and intensity of sonar returns.
Explains how colors represent sonar return intensity and how to set them.
Explains how Structure ID represents weak and strong sonar returns.
Highlights the strongest sonar returns in white for clearer bottom definition.
Controls how sonar returns are displayed in Sonar Views (Max Mode/Clear Mode).
Explains how to freeze the display and use a cursor for detailed sonar analysis.
Allows menu setting adjustments to update instantly on the screen.
Explains how Down Imaging™™ images are produced and how sonar history scrolls.
Guides on interpreting light/dark parts, white streaks, and shadows in DI display.
Controls how sonar returns appear on the display and reduces clutter.
Explains freezing the Down Imaging™™ display and using a cursor.
Presents a historical log of sonar returns with the most recent on the right.
Provides a magnified view of the bottom and structure for detailed analysis.
Displays sonar returns from different frequencies side-by-side for comparison.
Provides digital data in a large, easy-to-see format.
Uses high-definition beams to produce detailed sonar data on the display.
Displays sonar data in traditional flasher format with optional ice fishing features.
Shows traditional Sonar information on top and Down Imaging™™ sonar below.
Allows selection of operating modes like Normal, Simulator, and System Status.
Provides shortcuts to frequently-used settings based on the current view.
Organizes standard menu settings under tabs like Alarms, Sonar, and Setup.
Sets menu system complexity, affecting the visibility of menu options.
Controls display detail and adjusts the sensitivity of all sonar frequencies.
Sets the shallowest depth range displayed on Sonar, Split Sonar, etc.
Sets the deepest depth range displayed by the unit.
Determines the speed at which sonar information moves across the display.
Sets the magnification level for the Sonar Zoom View.
Graphs the bottom constantly in the zoomed view for better fish visibility.
Controls how much of the water column, measured from the bottom, is shown.
Controls how sonar returns are displayed on the Down Imaging™™ Views.
Allows adjustment of Sensitivity, Contrast, and Sharpness for the DI view.
Sets the shallowest depth range displayed on the Down Imaging™™ Views.
Sets the deepest depth range displayed by the unit.
Determines the speed at which sonar information moves across the display.
Allows selection of color palettes for the Down Imaging™™ display.
Controls display detail and adjusts sensitivity of sonar frequencies.
Sets the shallowest depth range displayed on Sonar, Split Sonar, etc.
Sets the deepest depth range displayed by the unit.
Sets the colors used to display sonar returns in the Circular Flasher View.
Sets the magnification level for the Circular Flasher View when Ice Fishing Mode is on.
Sounds when the depth becomes equal to or less than the menu setting.
Sounds when the Fishfinder detects fish corresponding to the alarm setting.
Sounds when the input battery voltage drops below the set threshold.
Sounds when the water temperature reaches the set alarm point.
Selects the pitch of the alarm sound.
Allows creating settings and starting countdowns for the Timer.
Starts the Timer using saved countdown settings.
Stops the Timer while it is counting down.
Sets which sonar returns from the transducer will be displayed on the screen.
Selects frequency for Down Imaging™™ beams for image quality or sharpness.
Adjusts the filter to remove surface clutter noise.
Controls how sonar returns are displayed (Max Mode/Clear Mode).
Interprets sonar returns and displays fish symbols when conditions are met.
Adjusts the threshold of Fish ID+™ detection algorithms.
Sets the RTS Window to Wide or Narrow, or turns it off.
Allows selection of color palettes for display on various views.
Selects the method used to represent bottom and structure on the display.
Adjusts the width of the zoomed view on the Sonar Zoom View.
Adjusts the sensitivity of the 455 kHz beam.
Divides the display into sections with horizontal depth lines.
Adjusts the sonar Noise Filter to limit interference on the display.
Controls the maximum depth of operation.
Configures the unit for operation in fresh or salt water.
Specifies beams used to provide depth for digital readouts.
Selects which beams display returns in the Down Imaging™™ View.
Controls how information is displayed in the Circular Flasher View.
Allows selection of color palettes for the Down Imaging™™ display.
Selects units of measure for depth-related readouts.
Selects units of measure for temperature-related readouts.
Selects units of measure for distance-related readouts.
Selects units of measure for speed-related readouts.
Sets the menu system to Normal or Advanced.
Selects the display language for menus.
Resets the Triplog to zero, showing timer, distance, and average speed.
Resets all menu settings to their factory defaults.
Sets available views to hidden or visible in the view rotation.
Sets information to display in fixed-position data windows on the screen.
Adjusts digital depth readout to indicate depth from waterline or boat's keel.
Adjusts the temperature readout by the amount entered.
Adds a tenth decimal place to readouts like Temperature and Depth.
Adjusts the speed readout by the percentage entered.
Controls whether Demonstration Mode is visible or off.
Sets when the control head will beep or sound for key presses and alarms.
Lists precautions for using and cleaning the control head screen.
Provides information to maintain transducer operation and clean its face.
Lists checks for power issues, including cable connection, wiring, fuse, and voltage.
Troubleshoots transducer detection issues if the unit defaults to Simulator mode.
Lists common display problems and their possible causes and solutions.
Identifies sources of electrical noise and interference affecting sonar reception.
To Next Page
