Need help?Do you have a question about the Humminbird 386ci Combo and is the answer not in the manual?
General| Display Type | Color TFT |
|---|---|
| GPS | Yes |
| Chartplotting | Yes |
| GPS Receiver | Internal |
| GPS Trackplotting | Yes |
| Humminbird PC | Yes |
| Upgradable Internal Software | Yes |
| Split Screen Zoom | Yes |
| Bottom Lock | Yes |
| Large Digits View | Yes |
| Custom View Selections | Yes |
| Temperature Alarm | Yes |
| Waterproof Rating | IPX7 |
| Transducer | Included |
| Display Size | 3.5 inches |
| Sonar Frequency | 200/455 kHz |
| Sonar Type | Dual Beam |
| Maximum Depth | 600 ft |
| Depth Capability | 600ft |
| Target Separation | 2.5 inches |
| Temperature | Built In |
| Waypoints, Routes, Tracks/Points | 3000, 50, 50 |
| Sonar Coverage | 60° / 20° |
Details the 200/83 kHz DualBeam PLUS™ sonar system's operation.
Explains the primary functions of each key on the control head.
Allows adding charts and managing navigation data using memory cards.
Explains stored positions, paths for navigation, and detailed position history.
Procedures for managing waypoints, including saving, creating, and deleting.
How to start navigation to a selected waypoint or cursor position.
Explains the various information displayed on the sonar screen.
Opens the Waypoint Management dialog box for organizing navigation data.
Checks and solutions if the fishfinder does not power on.
Identifies causes and solutions for problems with information quality on the display.
Identifies sources of electrical noise or interference affecting sonar reception.
To Next Page