Need help?Do you have a question about the Humminbird 345C DI and is the answer not in the manual?
General| Display Size | 3.5 inches |
|---|---|
| Display Type | Color TFT |
| Display Resolution | 320 x 240 |
| Sonar Type | Dual Beam |
| Down Imaging | Yes |
| Maximum Depth (Dual Beam) | 600 ft |
| Maximum Depth (Down Imaging) | 150 ft |
| Transducer Frequency (Down Imaging) | 455 kHz |
| Target Separation | 2.5 inches |
| GPS | No |
| Chartplotting | No |
| Waterproof Rating | IPX7 |
| Depth Capability | 600 ft |
| Operating Temperature | -15°C to 55°C |
| Display Pixel Matrix | 320 x 240 |
Controls how sonar returns appear on the display.
Accessing sensitivity, speed, and color palette settings.
Description of Screen, VIEW, 4-WAY Cursor, MENU, EXIT, POWER/LIGHT keys.
Using the POWER/LIGHT key for power and backlight.
How to cycle through available display views.
Accessing Start-Up, X-Press, and Main Menus.
Using the cursor for menu selection and freeze frame.
Canceling alarms, exiting menus, and cycling views.
Overview of Start-Up, X-Press, and Main Menus.
Setting up for on-the-water use with a transducer.
Using simulator for learning features and saving settings.
Instructions for quick access to frequently-used settings.
Steps to highlight tabs and select menu options.
Steps to change user mode and its effect on menus.
Sets the shallowest depth range displayed.
Sets the deepest depth range displayed.
Determines how fast sonar information moves across the display.
Magnification and bottom tracking for zoomed views.
Controls water column shown in Sonar Zoom View.
Sets the deepest depth range for Down Imaging.
Adjusts detail shown on the flasher display.
Sets the shallowest depth range for the flasher.
Sets the deepest depth range for the flasher.
Setting depth and fish detection alarms.
Warning for low battery voltage.
Setting temperature alarms and alarm sound pitch.
Adjusts filter to remove surface clutter noise.
To Next Page
