Humminbird 360 Imaging User Manual

360 Imaging
™
Operations Manual
532074-2_A
360 Imaging
™
Operations Manual

Humminbird 360 Imaging Specifications

General

Frequency	455 kHz
Coverage	360 degrees
Range	Up to 150 feet
Mounting Location	Transom or trolling motor
Display	Compatible with Humminbird displays

Summary

Set up Network and Imaging Alarms

Select 360 Imaging on the Network

Configure the 360 Imaging transducer on the network for the Fishing System.

Select Beams and Temperature Sources

Confirm sonar and temperature source selections for 2D, Side, and Down Imaging views.

Set the Deployment Depth

Set the deployment depth for the 360 Imaging transducer pod.

Start 360 Imaging Operation

Start Pinging

Initiate 360 Imaging sonar operation for Trolling Motor Mount.

Deploy the Transducer

Deploy the 360 Imaging transducer from the deployment system.

Views

360 View

View the 360 Imaging data on the full screen for detailed analysis.

360/Sonar Combo View

Combines 360 Imaging and Sonar views in a split screen.

Change 360 View Display Settings

Enhance the View

Mark and Display Waypoints

Turn on/off Navigation in the 360 Views

Enable or disable waypoint display and navigation features within 360 views.

Update the Software

Power Off