EasyManua.ls Logo

Humminbird Wide 3D View User Manual

Humminbird Wide 3D View
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Humminbird Wide 3D View and is the answer not in the manual?

Humminbird Wide 3D View Specifications

General IconGeneral
Sonar Coverage90 degrees
Operating Frequency455 kHz
Power Output500 Watts (RMS)
Depth Capability600 ft
Frequency455 kHz
GPSNo
Waterproof RatingIPX7
Beam Angle90 degrees
Display Resolution320 x 320

Summary

INSTALLATION PREPARATION

Determining How to Mount the Transducer

Discusses options for mounting the transducer, including transom and inside-hull methods.

INSTALLATION

Transom Installation

Instructions for installing the transducer on the transom of the boat.

Inside the Hull Installation

Instructions for installing the transducer inside the boat's hull.

Control Head Installation

Instructions for installing the fishfinder's control head unit.

Test the Installation

Guides on testing the installed fishfinder's functionality.

CONTROL FUNCTIONS

Primary Control Buttons

Explains the function of Power, Stop, View, and Light buttons.

Sensitivity Adjustment

Explains how to adjust receiver sensitivity for optimal display.

Range Control

Describes automatic and manual depth range adjustment.

Bottom Alarm Setting

Explains how to set an audible alarm for shallow water depths.

Fish Alarm Operation

Details how to set an audible alarm for detected fish.

SYSTEM OPTIONS

Sonar Mode Selection

Selects between down-looking, side-looking, or diagnostic sonar modes.

WIDE SIDE OPERATION

Accessory Transducer Introduction

Introduces the Wide Side accessory transducer and its capabilities.

Related product manuals