Need help?Do you have a question about the Humminbird Wide Vision and is the answer not in the manual?
General| Sonar Type | Dual Beam |
|---|---|
| GPS | No |
| Display Size | 5 inches |
| Sonar Frequency | 200 kHz |
| Beam Angle | 20° & 60° |
| Water Resistance | Yes. Waterproof. |
Details about included parts, optional accessories, and a general installation overview.
Details methods for mounting the transducer, including transom and inside hull installations.
Explores alternative transducer mounting techniques for different boat types and conditions.
Information on transducer exchange and initial preparation steps for installation.
Step-by-step guide for installing the transducer on the boat's transom.
Instructions for drilling mounting holes and assembling the transducer components.
Procedures for attaching the transducer and setting its running position.
Guidance on properly routing the transducer cable for safe operation.
Steps to identify the optimal mounting location inside the boat's hull.
Procedures for testing and permanently mounting the transducer inside the hull.
Selecting a mounting spot and connecting the control head to the power source.
Drilling for bracket mounting and routing cables to the control head.
Steps to connect and secure the cable connectors to the control head bracket.
How to use the simulator and an overview of the unit's screen display and data.
Describes the function of the POWER, STOP, and LIGHT buttons for unit operation.
Details how to navigate and use the menu system with MENU, UP, DOWN, and ENTER buttons.
Explains how to select dual, narrow, or wide beam settings for optimal sonar returns.
Adjusting the unit's sensitivity and bias for clear signal reception and target identification.
Options for displaying bottom texture and managing depth range settings.
Explains auto/manual range selection and using the zoom feature for detailed analysis.
Configuring bottom lock, shallow water, and fish alarms, plus target ID features.
Displaying raw sonar data and utilizing the trip log for tracking boat performance.
Adjusting display update speed and screen contrast for optimal viewing.
Selecting sonar modes and user experience levels (Normal/Advanced).
Explains how the advanced mode optimizes display and speeds up adjustments.
Setting the sonar mode to "side" for use with the Wide Side transducer.
Controlling transducer beam selection and manual range settings for Wide Side mode.
How standard menu functions like alarms and sensitivity work with Wide Side.
To Next Page