Need help?Do you have a question about the Humminbird Wide 128 and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | Wide 128 |
| Category | Fish Finder |
| Language | English |
Lists all components provided with the new Humminbird fishfinder.
Details Humminbird's range of accessories to enhance fishfinder capabilities.
Provides an overview of the fishfinder's installation, focusing on control head and transducer.
Explains how to determine the best location and method for mounting the transducer.
Covers alternative transducer types and mounting methods for various boat hulls.
Information on exchanging the standard transducer for a different type.
Lists necessary tools and parts for beginning the fishfinder installation.
Detailed instructions for installing the transducer on the boat's transom.
Covers the process of installing the transducer inside the boat's hull.
Instructions for installing the fishfinder's control head unit.
Procedures for testing the installed fishfinder for proper operation after installation.
Explains the various elements displayed on the fishfinder's screen.
Guides on how to understand and interpret the sonar data displayed on the screen.
Details the function of the POWER button for operation and simulator mode.
Explains how to control the display backlight for visibility.
Describes the function of the navigation buttons for menu control and adjustments.
Overview of how to access and navigate through the unit's menus.
How to adjust the sonar receiver sensitivity for optimal performance.
Explains how to adjust the depth range for detailed display of water conditions.
Details how to use the zoom feature to enlarge specific areas of the display.
Instructions for setting up and using the audible shallow water depth alarm.
How to enable and configure the fish alarm to alert for fish detection.
Explains the Fish ID settings for interpreting sonar returns as fish.
How to use the built-in diagnostic tool to check unit performance and connections.
To Next Page