Need help?Do you have a question about the Humminbird Wide 100 and is the answer not in the manual?
Lists components included in the fishfinder box.
Explains options for mounting the transducer on the boat hull.
Provides detailed steps for mounting the transducer on the boat's transom.
Guides on installing the transducer inside a fiberglass boat hull.
Covers the procedure for mounting and connecting the main control unit.
Outlines methods for testing the fishfinder after installation.
Lists components included in the fishfinder box.
Explains options for mounting the transducer on the boat hull.
Provides detailed steps for mounting the transducer on the boat's transom.
Guides on installing the transducer inside a fiberglass boat hull.
Covers the procedure for mounting and connecting the main control unit.
Outlines methods for testing the fishfinder after installation.
General| Operating Frequency | 200 kHz |
|---|---|
| Power Output | 100 watts (RMS), 800 watts (peak to peak) |
| Depth Capability | 600 feet |
| Sonar Type | Single Beam |
| Beam Angle | 20 degrees |
| Temperature Sensor | Yes |
| Battery Requirement | 12 VDC |
| Sonar Coverage | 20 degrees |
| Display | LCD |
To Next Page