Need help?Do you have a question about the Humminbird Wide Portrait and is the answer not in the manual?
Power| power output (200 kHz) | 300 Watts (RMS) |
|---|---|
| power output (200 kHz) peak to peak | 2400 Watts |
| power output (455 kHz) | 300 Watts (RMS) |
| power output (455 kHz) peak to peak | 2499 Watts |
| power requirement | 10 - 16 VDC |
Display| display type | Super Twist LCD |
|---|---|
| lcd matrix | 128 x 128 |
| viewing area | 4.00” H x 3.00” V |
Transducer| transducer (standard) | XT-6-TB-90 |
|---|---|
| transducer cable length | 20 feet |
Depth and Zoom Ranges| depth ranges | 15, 30, 60, 120, 180, 240, 360, 480, & 600 feet |
|---|---|
| zoom ranges | 7 ½, 15, 30, & 60 feet |
Weight and Dimensions| unit size | 7 ¾” H x 7 7/8” W x 4 ¼” D |
|---|
Lists components included in the package for initial setup.
Information on optional accessories to enhance fishfinder capabilities.
Provides a summary of the installation process and key components.
Step-by-step guide for mounting the transducer on the boat's transom.
Detailed instructions for mounting the transducer inside the boat's hull.
Instructions for mounting and connecting the main control unit of the fishfinder.
Procedures for verifying the correct operation of the installed fishfinder.
How to use the simulator mode for learning and practice.
Explains how to read and understand the data displayed on the fishfinder screen.
How to adjust the sonar receiver sensitivity for optimal performance.
How to set depth ranges for optimal display resolution and target separation.
How to enlarge specific areas of the display for more detailed information.
Guide to personalizing settings for units, fish ID, and display preferences.
How to use the built-in diagnostic tool for troubleshooting and checking connections.
To Next Page