Need help?Do you have a question about the Humminbird Wide Eye and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | Wide Eye |
| Category | Fish Finder |
| Language | English |
Lists components included in the fishfinder box.
Describes available accessories for the fishfinder.
Provides a general overview of the fishfinder installation process.
Explains methods for mounting the transducer, including transom and inside hull.
Discusses alternative transducers and mounting options like portable and thru-hull.
Details how to exchange the standard transducer for another type.
Lists tools and parts needed to start the installation process.
Guides on selecting the optimal location for transom transducer mounting.
Provides instructions for drilling holes for the transducer mount.
Details how to assemble the transducer with its mounting hardware.
Explains how to attach the assembled transducer to the boat's transom.
Guides on adjusting the transducer's angle and height for optimal performance.
Instructions for routing the transducer cable through the boat's hull.
Guides on selecting the best location for an inside-hull transducer.
Explains how to test the inside-hull transducer mounting location before permanent installation.
Details the steps for permanently fixing the transducer inside the hull with epoxy.
Guides on selecting an appropriate location for the control head.
Instructions for connecting the unit's power cable to the boat's electrical system.
Details drilling holes for the control head mounting bracket.
Explains how to route cables through the mounting surface and bracket.
Describes how to connect cables and mount the connector holder.
Guides on powering up the unit and confirming basic operation.
Explains how to use the simulator mode for learning.
Describes the fishfinder's display elements and layout.
Introduces the unit's buttons and their basic functions.
Explains how to navigate and use the unit's menu system.
Details the sensitivity setting and its automatic adjustment.
Explains automatic and manual depth range adjustment.
Describes the zoom feature for detailed viewing of specific depth ranges.
Explains the Bottom Lock function for focusing on terrain variations.
Details how to set up and use the shallow water alarm.
Explains the fish detection alarm settings.
Describes the automatic target identification features.
Introduces the advanced operating mode for experienced users.
Explains scroll rate adjustment for display update speed.
Introduces the Wide Side accessory transducer and its capabilities.
Guides on configuring the sonar mode for the Wide Side transducer.
Explains how to select left, right, or both beams for side-looking sonar.
Details manual range control for the Wide Side transducer.
To Next Page