Humminbird LCR W User Manual

Humminbird LCR W Specifications

General

Brand	Humminbird
Model	LCR W
Category	Fish Finder
Language	English

Summary

Installation Preparation

Parts Supplied

Transducer Mounting Options

Explains transom and inside-hull mounting options for the transducer.

Required Installation Tools

Transom Installation

Determine Transducer Location

Guides on selecting the optimal transom location for the transducer.

Drill Mounting Holes

Assemble Transducer

Mount Transducer to Transom

Steps for attaching the assembled transducer to the transom.

Adjust Transducer Running Position

Guidance on adjusting the transducer's angle and height for optimal performance.

Route Transducer Cable

Inside the Hull Installation

Determine Mounting Location

Guides on selecting the best inside-hull location for the transducer.

Test Mounting Location

Describes how to test the transducer mounting location before permanent fixing.

Permanently Mount Transducer

Details on permanently securing the transducer inside the hull with epoxy.

Control Head Installation

Determine Control Head Mount Location

Connect Power Cable

Instructions for connecting the unit's power cable to the boat's electrical system.

Drill Mounting Holes for Bracket

Run Cables to Mount Location

Assemble Connector Holder and Mount Unit

Test the Installation

Installation Testing Procedures

Procedures for testing the installed fishfinder's functionality.

Installing the LCR W Unit

LCR W Unit Mounting and Connections

Testing LCR W Installation

Explains how to test the LCR W unit and transducer performance on the water.