Need help?Do you have a question about the Humminbird 532769-3_A and is the answer not in the manual?
Lists compatible control heads and trolling motors for MEGA Live Imaging.
Lists necessary installation supplies like cable ties, fuses, and tools.
Explains how to verify the current software version on control heads.
Instructions for updating control head software using an SD card.
Steps to update accessory software using an SD card for APEX/SOLIX and HELIX.
Guide to using the FishSmart App for software updates.
Steps to prepare for installing the MEGA Live Imaging transducer on the trolling motor.
Instructions for attaching the Landscape Mode mount to the transducer.
Guides for installing the shaft mount onto the trolling motor shaft.
Steps for installing the shaft clamp onto the trolling motor shaft.
Instructions for routing cables and connecting power for the transducer.
Criteria for deciding if the choke cable is necessary for noise reduction.
Verifying that the MEGA Live Imaging transducer and GPS sensor are detected.
How to confirm MEGA Live is selected in the Network Source Setup.
Instructions for testing MEGA Live imaging returns on the display.
How to confirm the Heading Sensor is installed and functioning correctly.
Guidance on network setup and confirming NMEA baud rates for accessories.
Steps to power off the control head and the transducer.
Precautions for transporting the boat with the transducer installed.
Precautions and cleaning instructions for the Humminbird control head.
Tips for cleaning and maintaining the transducer.
Maintenance for the MEGA Live Imaging transducer installation and storage.
Steps to diagnose and fix power-up issues with the fishing system.
Troubleshooting steps when the system defaults to simulator mode.
Identifying and isolating sources of electrical noise or interference.
Lists compatible control heads and trolling motors for MEGA Live Imaging.
Lists necessary installation supplies like cable ties, fuses, and tools.
Explains how to verify the current software version on control heads.
Instructions for updating control head software using an SD card.
Steps to update accessory software using an SD card for APEX/SOLIX and HELIX.
Guide to using the FishSmart App for software updates.
Steps to prepare for installing the MEGA Live Imaging transducer on the trolling motor.
Instructions for attaching the Landscape Mode mount to the transducer.
Guides for installing the shaft mount onto the trolling motor shaft.
Steps for installing the shaft clamp onto the trolling motor shaft.
Instructions for routing cables and connecting power for the transducer.
Criteria for deciding if the choke cable is necessary for noise reduction.
Verifying that the MEGA Live Imaging transducer and GPS sensor are detected.
How to confirm MEGA Live is selected in the Network Source Setup.
Instructions for testing MEGA Live imaging returns on the display.
How to confirm the Heading Sensor is installed and functioning correctly.
Guidance on network setup and confirming NMEA baud rates for accessories.
Steps to power off the control head and the transducer.
Precautions for transporting the boat with the transducer installed.
Precautions and cleaning instructions for the Humminbird control head.
Tips for cleaning and maintaining the transducer.
Maintenance for the MEGA Live Imaging transducer installation and storage.
Steps to diagnose and fix power-up issues with the fishing system.
Troubleshooting steps when the system defaults to simulator mode.
Identifying and isolating sources of electrical noise or interference.
General| Brand | Humminbird |
|---|---|
| Model Number | 532769-3_A |
| Category | Marine Equipment |
| Depth Capability | 600 ft |
| Product Type | Fish Finder |
| Type | Fish Finder |
| Sonar Type | Dual Beam |
| Frequency | 200/455 kHz |
To Next Page