Need help?Do you have a question about the Humminbird Platinum ID 600 and is the answer not in the manual?
General| Sonar Type | Dual Beam |
|---|---|
| Display Size | 5 inches |
| Operating Frequency | 200kHz |
| Depth Capability | 800 feet |
| Sonar Frequency | 200 kHz / 83 kHz |
| Water Resistance | Yes |
| Beam Angle | 20 and 60 degrees |
Details various transducer mounting methods, including transom and inside hull options.
Step-by-step guide for installing the transducer on the boat's transom.
Instructions for mounting the transducer inside the boat hull using epoxy.
Guide for mounting the LCR unit and connecting power and transducer cables.
Steps to test the functionality of the installed Platinum ID unit on the water.
Guide on activating and using the simulator to learn unit functions and controls.
How to select and use the ID feature to identify targets and their signal strength.
Instructions for switching between statute miles (MPH/SM) and nautical miles (knots).
Guidance on manually adjusting the unit's sensitivity for better target detection.
How to set an alarm for minimum desired depth to warn of shallow water.
How to configure audible alerts for detected fish or other targets.
Explains how to activate and adjust the zoom feature for a closer view.
How to use Bottom-Lock for a dynamic view that tracks the bottom contour.
How to adjust the speed at which the display updates as you move.
Information on using the Trip Log to record average speed, elapsed distance, and time.
To Next Page