Humphree Lightning - Calibrate Starboard Side Rudder

23
6. SET UP THE LIGHTNING SYSTEM
2
TO SET THE FULL PORT VALUE, go to:
RUDDER SIGNAL > CALIBRATE PORT
• Select the SET button
6.2.2 CALIBRATE STARBOARD SIDE RUDDER
1
TURN THE RUDDER FULL STARBOARD, by turning the steering wheel of the
boat toward starboard until the wheel stops and hold the position.
PORT
STARBOARD
2
TO SET THE FULL STARBOARD VALUE, go to:
RUDDER SIGNAL > CALIBRATE STARBOARD
• Select the SET button