files]/[Unlock current file]/[Unlock all files].
Working Mode
Switch the Mode Button to "On", camerahas red flash for 5
seconds, then camera beginsto work.
• If the wild animals enter the detection range of the motion
sensors, the camera will be activated and start to take pictures
or videos.
• If the wild animals continue to move to the detection zone of
the sensor, the camera will take photos or record video
automatically.
• When the wild animals leave the detection zone of the sensors,
the camera will be deactivated and turn back to standby mode.
Night Mode
In night mode,the pictures are white and black mode.
When record a video for long time in the evening, the low voltage
may have a great influence on the stability of the machine, thus do
not record video with low voltage in the evening.
Connecting the Camcorder to a PC by the USB Cable
1. Connect the camera to the computer via a USB cable.Tum on
the camera,the screen displays"Mass Storage,^.
2. Open [My Computer] or [Windows Explorer]. A
n
Removable
Disk” appears in the drive listDouble-click the "Removable
Disk" icon to view the contents from the camera.
Please notice - All products are subject to change without
any notice. We take reservations for errors and omissions in
the manual.
To Next Page
